My Nighthawk Router Is Uploading but Not Downloading

What are the common bug with Linksys Smart Wi-Fi Routers and Linksys Wi-Fi Routers?

 The quickest and easiest workaround for most issues apropos Linksys routers is to powercycle the device.  To do this, ability OFF the router, unplug the power cord and wait for 10 seconds before plugging it back in.

 If the problem still persists after performing a powercycle, you may so go along with other workarounds for the issues listed below:

Dropping / Intermittent wireless connectivity
Slow downloads
Slow upload
Forgot the wireless settings of the router
Unable to access the router'southward web-based setup folio

Dropping / Intermittent wireless connectivity

At that place are four (iv) factors contributing to why the wireless connexion between your Linksys router and your device is intermittent and dropping:

• Maximum Transmission Unit size
• Frequency interference from other wireless devices
• Low signal quality received from your wireless router
• Outdated router firmware

Frequent wireless disconnection can be resolved by doing the following:

• Adjusting the Maximum Transmission Unit size
• Reducing wireless interference
• Customizing the wireless settings of the router
• Updating the firmware of the router

For information on how to resolve these problems, click here .

Dull downloads

A slower-than-normal download may exist due to the IPv6 feature on your computer.  One of the solutions may be disabling IPv6.  Refer to the technical back up of your calculator's operating organization for instructions on how to disable IPv6 on your computer.

Why this works: The slow download is caused past the use of IPv4 as the default protocol in your network; the slower information transfer is rooted on the "translation" of the data into an IPv6 compatible form.

 If the issue still exists later performing the steps to a higher place, you lot tin besides perform the post-obit troubleshooting tips:

• Isolate the issue past checking if your other computers have the same download speed.
• Check if your estimator has the same download speed when connected straight to the modem.
• If the suggested solutions made no changes with the download speed, do the following in order:

i.   Perform a firmware upgrade.  For instructions, click here  if you are using a Linksys Wi-Fi Router.  For Linksys Smart Wi-Fi Routers, click here .
ii.  Reset the router past pressing and holding the Reset push button for 10 seconds using a pen or any pointed object.
iii. Reconfigure the router using your ISP'south connectedness: Cable Cyberspace service , DSL Net service , Static IP account

Slow upload

Linksys Smart Wi-Fi Routers and Linksys Wi-Fi Routers are known for their fast upload and download speeds, so if you experience a slowdown in your upload speed, yous may need to set your router'sQuality of Service (QoS).  This ways controlling the priority of your network traffic, ensuring that the data y'all consider most important gets through faster.

 To learn how to fix up QoS, check

hither .

Forgot the wireless settings of the router

In order to connect to the wireless network, you need to know its wireless settings.  These settings refer to the wireless network proper noun (SSID) and wireless password / passphrase.  To bank check the wireless settings of your router, click

hither .  It is as well recommended to take note of your wireless settings in a piece of paper to serve as your quick reference in case you forget information technology.

Unable to access the router's spider web-based setup page

The Linksys router'due south spider web-based setup folio can be accessed using a wired or wireless computer.  To do this, enter the router's default IP Accost "192.168.1.1" in your spider web browser'south address bar.  A user login will then announced asking you to enter a username and password.  If yous accept not changed your wireless settings yet, you may get out the username blank and the password is admin.

 However, there are times when you are unable to access the router'due south web-based setup page, this may be because:

• The router's IP Address has been changed
• The router's countersign has been changed
• The router'southward firmware needs to exist upgraded
• There is no network connection with the router
• The computer's firewall may be blocking the connection

For specific details on what to do if y'all are unable to admission the router'southward spider web-based setup page, click hither .

joynertheirligh.blogspot.com

Source: https://www.linksys.com/us/support-article?articleNum=135766

Share this post